Where To Buy     Partner Login    
Call us for more information: (604) 233-0247     Email Us: energy@foreseeson.com

Commercial Charger

  • CT4021 gateway dual output charging station bollard mount
  • Dual output, bollard unit – 208/240V @30A with cord management
  • Hardware only. Not included service and installation
  • For service and installation, please contact Foreseeson EVSE sales team



SKU: CT4021-GW1 Category:


Commercial Charger

SKU: CT4021-GW1

  • Energy Management: Lower both installation and electricity costs with advanced energy management tools such as panel sharing and scheduled charging.

  • Speed: Our Level 2 Commercial chargers charge at a maximum rate of 25 RPH (miles of Range Per Hour). CT4000 stations can fully charge some vehicles in less than four hours.

  • The Network Effect: Our cloud-based services give you access to the largest community of EV drivers and the flexibility and control you need to serve your drivers.

  • Clean Cord Technology: Keep cords safely off the ground with a self-retracting, maintenance-free, ultra-lightweight cord management system.

  • World Class Support: Our service products and support services have you covered from site planning to your ongoing care and management, including phone support for you and your drivers.

  • Safe and Reliable: CT4000 stations are UL listed, meeting the stringent requirements of the nation’s leading safety standards organization.

  • Best-in-Class Hardware: CT4000 stations are rugged and built to withstand the elements. They can be installed outdoors or indoors.

  • Smart, Networked Charging: Receive automatic software updates that deliver the latest improvements and features. Remotely monitor, manage and configure stations. You can get real-time station information and generate automated reports.


Electrical Input      
  Input Current Input Power Connection Required Service Panel Breaker
Standard 30A x 2 Two Independent 40A branch circuit 40A dual pole (non-GFCI type) x2
Standard Power Share 32A One 40A branch circuit 40A dual pole (non-GFCI type) 
Power Select 24A 24A x 2 Two independent 30A Branch 30 branch circuit 30A dual pole (non-GFCI type) x2
Power Select 16A 16A x 2 Two independent 20A branch circuit 20A dual pole (non-GFCI type) x2
Wiring – Standard 5-wire (L1, L1, L2, L2, Earth)
Wiring – Power Share 3-wire (L1, L2, Earth)
Station Power 8W typical (standby), 15W maximum (operation)
Electrical Output      
Standard 7.2kW (240VAC @ 30A) x2    
Power Select 24A 5.8kW (240VAC @ 30A) x2    
Power Select 16A 3.8kW (240VAC @ 16A) x2    
Connector SAE J1772 x2    
Cable Lenth 5.5m x2    
Overhead Cable Management Yes    
LCD Display 5.7″    
Full ColourResolution: 640×480    
Frame Rate: 30 FPS    
UV Protected    
Card Reader ISO 15693    
ISO 14443    
Locking Holster Yes    
Safety And Connectivity Features      
Ground Fault Detection 20mA with auto retry    
Open Safety Ground Detection Continuously monitors presence of safety (green wire) ground connection    
Plug-Out Detection Power terminated per SAE J1772™ specifications    
Power Measurement Accuracy +/- 2% from 2% to full scale (32A)    
Power Report/Store Interval 15 minute, aligned to the hour    
Local Area Network 2.4 GHz Wi-Fi (802.11 b/g/n)    
Wide Area Network 3G GSM, 3G CDMA    
Saftey And Operation Rating      
Enclosing Rating Type 3R per UL 50E    
Safety Compliance cUL certified for Canada; Complies with UL 2594, UL 2231-1, UL 2231-2, and NEC Article 625    
Surge Protection 6kV @ 3000A. In geographic areas subject to frequent thunderstorms, supplemental surge protection at the service panel is recommended.    
EMC Compliance FCC Part 15 Class A    
Operating Temperature -30°C to +50°C    
Storage Temperature -30°C to +60°C    
Non-Operating Temperature -40°C to +60°C    
Operating Humidity Up to 85% @ +50°C non-condensing    
Non-Operating Humidity Up to 95% @ +50°C non-condensing    
Terminal Block Temperature Rating 105°C    
Maximum Charging Station per 802.11 Radio Group 10. Each station must be located within 150 feet “line of sight” of a gateway station.    
“All trade names, marks and logos used here belong to the proper owners.”
“The Specification and Terms/Conditions of the products and services could be changed from time to time. The Buyer should reconfirm the Specification and Terms/Conditions before the purchasing.”
“All documents should be used only for Reference for the business, not for any other purpose.”
Close Menu